Dashboard/Verification/Create Renewable Energy Project

Create Renewable Energy Project

Submit your renewable energy project for verification. Complete all sections below to initiate the IPCC/CDM-compliant review process.

Project Identity

Basic project and owner information

Step 1 of 5

Project Name *

Name of your renewable energy project

Owner Name *

Full name of the project owner or organization responsible for the project

Email Address *

Email address of the project owner for contact and communication purposes

Phone Number *

Phone number of the project owner for contact purposes

Project Location *

Specific location or name of the project site (e.g., West Java Solar Corridor, East Nusa Tenggara Wind Zone)

Country *

Country where the project is located

Baseline Year *

Reference year for baseline grid emissions and additionality calculations

Commissioning Date *

Date when the project became operational

Methodology Reference *

Renewable energy methodology (ACM/AMS standards)

Location Coordinates

Provide precise GPS coordinates of the project site. Coordinates are used for geographic verification and improve carbon reduction calculation accuracy.

Latitude *

Decimal latitude of the project site (e.g., -6.200000) — used for geographic verification

Longitude *

Decimal longitude of the project site (e.g., 106.816666) — used for geographic verification

Altitude (m) (optional)

Elevation above sea level in metres (optional) — relevant for wind and hydro projects

Technical Specifications

Technology type, capacity, and performance parameters

Step 2 of 5

Technology Type *

Primary renewable technology (solar/wind/hydro/geothermal/biomass)

Installed Capacity (MW) *

Total installed capacity in megawatts (MW) - determines baseline emissions

Project Lifetime (years) (optional)

Expected operational lifetime of the project in years (typically 20–30 years) — used for lifetime carbon reduction projections

Plant Capacity Factor (%) (optional)

Ratio of actual annual generation to theoretical maximum (0–100%). Overrides engine estimate when provided for greater accuracy

Gross-to-Net Ratio (%) (optional)

Ratio of net to gross generation (0.85–1.00). Accounts for on-site auxiliary consumption and parasitic loads

Transmission & Distribution Losses (%) (optional)

Percentage of generated electricity lost in transmission & distribution lines (typically 2–8%)

Energy Generation Data

Verified metered generation and baseline emission factor

Step 3 of 5

Annual MWh Generated *

Annual electricity generation in MWh - critical for emissions avoidance calculation

Grid Emission Factor (tCO₂/MWh) *

Grid emission intensity (tCO₂/MWh) - used to calculate avoided emissions

Emission Factor Source *

Source of emission factor (national/IEA/IPCC) - affects credibility

Metering Report (PDF/Excel) *

Verified meter readings proving actual generation - required for accuracy

Upload Metering Report

Additionality Inputs & Project Photos

Financial, regulatory evidence, and site documentation photos

Step 4 of 5

CAPEX (USD) *

Capital expenditure in USD - supports additionality assessment

Expected IRR Without Carbon (%) *

Expected IRR without carbon revenue (%) - proves financial additionality

Regulatory Support Present? *

Whether project receives mandatory renewable subsidies

Project Photos (optional)

Upload up to 5 photos of the project site as visual evidence. JPG/PNG/WEBP only, max 1 MB per photo.

0/5

Upload Project Photos

Upload up to 5 photos of the project site (JPG/PNG, max 1 MB each). Photos serve as visual evidence during verification.

Accepted: JPG, PNG, WEBP · Max 1 MB per file · Max 5 photos

Data Accuracy Declaration & Review

Declare accuracy and review your submission

Step 5 of 5

By submitting this verification form, the project owner declares that all data, information, and supporting documents provided are accurate, truthful, and complete to the best of their knowledge. Any misrepresentation may result in revocation of verification status.

I hereby declare that all information submitted in this verification form is accurate, truthful, and complete. I understand that providing false or misleading information may result in rejection or revocation of the verification.

Data Accuracy Declaration Document (PDF/Image) *

Upload a signed declaration document (PDF or image) confirming the accuracy of the submitted data

Upload Declaration

Form Status

Some required fields incomplete

Complete

What Happens Next?

Project submission and validation

Generation data verification

Grid emission factor cross-check

Additionality assessment

Aura verification

Final credit issuance

Estimated Timeline

Project verification typically completes in 5-7 business days from submission.

🗓️Average verification: 6 days

📊Success rate: 98.7%

Need Help?

Check out our documentation for detailed guides on project creation and verification.

View Documentation →